Deathtrap Customs A/S

A 2-line red or blue lighted LCD digital speedo with button switch to switch between 7 available functions. Such as speed in MPH or KM/H, total distance, 2 different trip distances, and on-board voltage. When connected to a temperature sensor it can also indicate engine- or oil temperature. These meters are available with a chrome or black housing, and red or blue dial illumination. Housings are 48mm in diameter and have the switch button installed in the lower cap. Speedo, bracket, a Hall effect or Inductive pick-up sensor must be ordered separately. Meters can also be fitted in other 48mm diameter meter caps and brackets but then you will need to order a push button switch too.

Specifications

Individual speedo's with black housing and black bezel
Article number Description Retail price Add to list
LCD speedo with white face and blue illumination
Chrome bracket and cap with push button
Black bracket and cap with push button
Micro push button switch
Inductive pick-up sensor, M8x1x18mm, Stainless Steel
Stainless steel Hall sensor M12x1x20mm

Recommended Retail Prices include 25% sales tax.

Prices exclude shipping, import duties and installation.

Prices are based on EUR to NOK interbank rates obtained daily. The interbank rate is the rate that banks trade currency to each other. These prices must be used as a guide.

Note: Unless specifically indicated, the installation of a speedo, tacho or information center on 2002 thru 2017 V-Rod, 2004 thru 2013 Sportster, 2004 thru 2010 Softail, 2004 thru 2011 Dyna and 2004 thru 2013 Touring requires the separate purchase of ZPN 744267 Break-Out Box for the J-1850 Databus. The installation of a conventional speedo or information center (no tacho) on 2014 to present Sportster, 2011 to present Softail, 2012 to present Dyna and 2014 to present Touring requires the separate purchase of ZPN 746880 CAN-Switchbox for the CAN-Bus (HD-Link) system.